Go BottomOver sensitive Hydro on 4600 Deere
 | Terry Weivoda
Join Date: Posts: 1 
|
2000-05-15 16291
I posted a message a couple of weeks ago regarding sensitive hydro controls on my new Deere 4600 hydro. The problem has not been resolved despite the fact my dealer installed a new shock absorber on the hydro linkage. When mowing at full throttle in range B the tractor is extremely difficult to control. I am not mowing at a high speed. Deere claims they have not had one complaint on this issue. Is anyone mowing with a 4600-4700 hydro? My 4600 is the only large frame tractor that he has sold with a belly mower. At slower throttle settings the problem is not as bad. I need some help. The hydro is so sensitive to foot pressure that I am using my cruise control more than I should just to avoid the erratic speed. Would a stiffer spring/shock make a difference?
Reply to |
Quote Reply |
Add PhotoOver sensitive Hydro on 4600 Deere
| RCH
Join Date: Posts: 1
|
2000-05-15 16298
Terry, what about the tractor cutting out when leaning to the right? Any answers? ....
Reply to |
Quote Reply |
Add PhotoOver sensitive Hydro on 4600 Deere
| Terry Weivoda
Join Date: Posts: 1
|
2000-05-16 16332
My dealer was unable to find any obvious problem other than the fuel line was "pinched" some with cable ties that might have been a little tight. He was unable to find any obstruction in the fuel tank. I mowed this past Saturday on the same side hill that produced the problem and seemed ok. I will just have to wait and see if it returns. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This